Compact N...

Compact Steel Boilers

Fully assembled compact steel
boiler complete with oil or gas
pressure jet burner.

High Efficiency steel boiler with pressurised combustion chamber and suitable for matching with Natural Gas, LPG or oil burners.

The boiler is a simple, compact unit for small commercial premises and suitable for modular installations where larger outputs are required.

Product Features
• Floor standing boiler with robust and reliable steel construction
• Ideal low-cost choice for both replacement and new installations
• Choice of pressure jet oil or gas burner
• 3 models with range rateable outputs of 20 to 51kW
• Factory fitted stove enamelled steel casing and glass wool insulation
• Simple to install – and very easy to maintain with left/right handed door opening
• Control panel including thermostats, combined temperature and pressure gauge, and on/off switch
• Can be used in battery formation for higher output installations

Simple Installation
The Compact N is supplied fully assembled, with its robust casing and insulation fitted in the factory. This makes for a simple installation by the installer, with heating flow and return and chimney connections all easily accessible at the rear of the boiler. There’s even a multi pin plug and socket for electrical connection.

Characteristics

Dimensions

Technical Data	Compact N

		N1	N2	N3
Maximum input	kW	28	41	57
Minimum input	kW	22	30	40
Maximum output	kW	25	36	51
Minimum output	kW	20	28	36.5
Total capacity	L	31	37	53
Primary connections (female BSP)	Æ	1"	1"	1 1/4"
Flue circuit pressure drop	mbar	0.15	0.17	0.15
Flue connection	mm	130	130	150
Weight empty (excluding burner)	kg	108	122	157
Weight Full (excluding burner)	kg	139	159	210
Maximum operating pressure		Primary 5 bar. Test pressure 7.5 bar
Maximum operating temperature	°C	90	90	90
Natural gas flow rates	m³/h	3.7	4.8	6.6
Oil flow rate	Ltrs/hr	3.43	4.45	5

Site map | Legal notice | Glossary | FAQ

Contact ACV